Lav din egen Transfer Paper af Elaine Estelle

This is a brief article about the procedure for making your own

transfer paper. It will allow you to transfer a drawing on the front

of the paper to another surface, like carbon paper, but without the


issues that carbon or graphite present. Instead of carbon powder I use

pigment, which is more compatible with the paints I use.


First, for those of you are unfamilar with how transfer paper works, it is a

thin sheet of paper with a coating on the back that allows you to trace


over your drawing, and that will transfer those marks to another surface,


such as canvas or whatever. The coating in commercial transfer papers is


typically graphite. You could also quickly make your own by turning your


drawing over and just drawing over the back with charcoal or graphite, but


it's rather messy that way. This method is an improvement to those options,


and more versatile.


Simply told, all you need is some pigment and gum spirits of turpentine.

The type of paper I choose is vellum drawing paper, which is a somewhat

translucent and stiff tracing paper. I stir together small amounts of pigment

and a few drops of turpentine until I get a thin wash. After making a

drawing on the front of the vellum that I want to transfer, I turn it over and

apply the pigment with turpentine. I don't need to paint the whole back


area, just the lines of the drawing that I'm transfering, which is why I use


vellum so I can see through it easily. I like using a colored pencil to trace

over the lines so I can see where I've already marked.


Turpentine is all that's necessary as a binder of sorts. It's just strong enough

to hold the pigment but not too strong to prevent transfer. I've also tried

this with mineral spirits, which sort of works, but it's much messier since

it doesn't have any adhesive properties, and would be like using water.

Keep in mind, the turpentine isn't going to "fix" these marks you make.


They can still be lifted or erased unless you spray a fixative on them, just


like you would do if using commercial transfer paper.


Try this with different pigment colors. I hope you'll find it useful.


For more information ,click here: http://fayepaper.com



This is a brief article about the procedure for making your own


transfer paper. It will allow you to transfer a drawing on the front of the


paper to another surface, like carbon paper, but without the issues that


carbon or graphite present. Instead of carbon powder I use pigment, which

is more compatible with the paints I use.

First, for those of you are unfamilar with how transfer paper works, it is

a thin sheet of paper with a coating on the back that allows you to trace


over your drawing, and that will transfer those marks to another surface,


such as canvas or whatever. The coating in commercial transfer papers is

typically graphite. You could also quickly make your own by turning your

drawing over and just drawing over the back with charcoal or graphite,

but it's rather messy that way. This method is an improvement to those

options, and more versatile.

The issue with graphite or charcoal is that these micro slivers of carbon


can migrate up through the paint itself over time, also their dark value can

be difficult to cover with lean layers of paint, or lighter value pigments that

are transparent.

What this method allows you to do is make transfer paper using regular


pigment of your own choice rather than graphite. It doesn't have to be


black; even white pigment will work. It does involve the use of turpentine,

so if that material bothers you, bear that in mind, and also use proper


ventilation.

Simply told, all you need is some pigment and gum spirits of turpentine.


The type of paper I choose is vellum drawing paper, which is a somewhat

translucent and stiff tracing paper. I stir together small amounts of pigment


and a few drops of turpentine until I get a thin wash. After making a

drawing on the front of the vellum that I want to transfer, I turn it over and


apply the pigment with turpentine. I don't need to paint the whole back area,

just the lines of the drawing that I'm transfering, which is why I use vellum

so I can see through it easily. I like using a colored pencil to trace over the

lines so I can see where I've already marked.