Hvordan kan vi sublimere stof produkter korrekt Glad Great

Sublimation is a perfect decorating solution for performance polyester


apparel and microfiber towels, as well as mousepads. Mousepads have a

fabric covering, which just happens to be polyester. When you sublimate

these materials, the image is more vibrant and durable than any other

decoration process available, which makes the finished sublimated products

far superior than others on the market.

But to have a quality product, you have to sublimate them correctly to get


the best possible results. In this article, we will cover the proper techniques

to get these outstanding results each and every time, and explain why it is


important to do it the correct way.

TOOLS THAT WILL HELP

Heat presses have a top-heated platen, and a bottom platen that most often


has a rubber base. If you don’t use any special pads, in order to get


consistent pressure to keep the sublimation transfer paper against the fabric


when the sublimation dyes turn to a gas and go into the fabric fibers, you


have to use more pressure than is needed to compress the rubber on the

bottom platen. This gives you the press marks and the paper marks on the

fabric.

If you press a sublimation garment with a piece of sublimation paper in the


middle of the press, you will imprint the piece of paper into the fabric,


leaving a mark. Therefore, you must use a tool to prevent this. That tool is


Vapor Foam. By using a piece of Vapor Foam under the fabric that is bigger

than the image area, but smaller than the piece of transfer paper, the paper


cannot be pressed into the fabric, and you will get no press marks.Another

issue that can happen with fabric items is ghosting. Ghosting is when you


place your sublimation transfer onto the fabric item and close it in the press

to facilitate the sublimation process. When you open the press, the paper


can shift on top of the fabric item. When it shifts, the sublimation dyes may

still be gassing out from the paper, and you can get a secondary image off


center of the first image.

The sublimation dyes will go through the adhesive into the fabric and not

hurt your image at all. Further, the adhesive will stay on your paper and not

stay on the fabric.Spray adhesive is not recommended for hard substrates,


but in a pinch it can work okay. Spray adhesive works awesome with mouse

pads. You can use the spray tack to tack the mouse pads to the paper and


lay in a stack. This way you can prep a bunch of mouse pads ahead of


pressing them.One other thing you need to do with fabric items before


pressing them is to use a lint roller to remove dust. You need to do this to

remove any polyester lint that may have settled onto the fabric. downstream

adjustments from having an impact on their products.

Most items for sublimation are heat pressed at 400 degrees. With fabric

items, it is important to lower that temperature a bit. Heat presses have heat

elements that turn off and on to retain the set temperature. Due to this, the

temperature can move up and down a bit. When this happens, the


temperature can come too close to the melting point of the polyester, so you

should lower your temperature a bit when sublimating fabrics.

We generally start at 390 degrees, but you may have to lower it a bit,


depending on the actual operating temperature of your press. You will know

it is too high, if when you finish, your fabric has a gloss or sheen where it


touched the heat platen of the press.

THE TECHNIQUES AND TOOLS ARE THERE FOR SUCCESS

Don’t be scared to give fabric items a go. If you follow the tips and


techniques we described in this article and use the tools that are available,


you can easily sublimate amazing quality products. Sublimated fabric items

are hot sellers, and the profits are there for you.

For more information ,click here: http://fayepaper.com





Sublimation is a perfect decorating solution for performance polyester

apparel and microfiber towels, as well as mousepads. Mousepads have

a fabric covering, which just happens to be polyester. When you


sublimate these materials, the image is more vibrant and durable than

any other decoration process available, which makes the finished


sublimated products far superior than others on the market.

But to have a quality product, you have to sublimate them correctly to

get the best possible results. In this article, we will cover the proper


techniques to get these outstanding results each and every time, and

explain why it is important to do it the correct way.

TOOLS THAT WILL HELP

Heat presses have a top-heated platen, and a bottom platen that most


often has a rubber base. If you don’t use any special pads, in order to


get consistent pressure to keep the sublimation transfer paper against


the fabric when the sublimation dyes turn to a gas and go into the

fabric fibers, you have to use more pressure than is needed to compress

the rubber on the bottom platen. This gives you the press marks and

the paper marks on the fabric.

If you press a sublimation garment with a piece of sublimation paper


in the middle of the press, you will imprint the piece of paper into the

fabric, leaving a mark. Therefore, you must use a tool to prevent this.

That tool is Vapor Foam. By using a piece of Vapor Foam under the

fabric that is bigger than the image area, but smaller than the piece of

transfer paper, the paper cannot be pressed into the fabric, and you

will get no press marks.Another issue that can happen with fabric


items is ghosting. Ghosting is when you place your sublimation transfer

onto the fabric item and close it in the press to facilitate the

sublimation process. When you open the press, the paper can shift on

top of the fabric item. When it shifts, the sublimation dyes may still be

gassing out from the paper, and you can get a secondary image off


center of the first image.

The sublimation dyes will go through the adhesive into the fabric and

not hurt your image at all. Further, the adhesive will stay on your


paper and not stay on the fabric.Spray adhesive is not recommended

for hard substrates, but in a pinch it can work okay. Spray adhesive


works awesome with mouse pads. You can use the spray tack to tack


the mouse pads to the paper and lay in a stack. This way you can prep


a bunch of mouse pads ahead of pressing them.One other thing you

need to do with fabric items before pressing them is to use a lint roller

to remove dust. You need to do this to remove any polyester lint that


may have settled onto the fabric. downstream adjustments from having

an impact on their products.

Most items for sublimation are heat pressed at 400 degrees. With fabric

items, it is important to lower that temperature a bit. Heat presses have